UP900-G4 SERIES

6kVA-10kVA

UP900-G4 series is suitable where long back times are required for 1- 8 hours. The UP900-G4 is single-phase and offers the highest power availability with an output power factor of 1 (kVA=KW). The wide input voltage range means that UPS can guarantee a 100% stable output without using the battery for AC voltages of 176Vac to 288Vac.

Areas of Usage

REQUEST A QUOTE

SHARE

General Description
Technical Specifications
Documents

6kVA – 10kVA

The UP900-G4 series is suitable where long back times are required for 1- 8 hours. The UP900-G4 offers the highest power availability with an output power factor of 1 (kVA = KW). The wide input voltage range means that UPS can guarantee a 100% stable output without using the battery for AC voltages of 176Vac to 288Vac.

Advanced DSP and 3-level technology
Output power factor 1.0
Active power factor correction (APFC), input power factor up to 0.99
Active power factor correction (APFC), input power factor up to 0.99
High efficiency 95% (up to 98% in ECO mode)
Advanced digital parallel technology
Wide input voltage range (110 ~ 288 Vac) and frequency range (40 ~ 70 Hz)
50 I 60 Hz frequency auto-sensing
Two modes of frequency conversion: 50 Hz input/ 60 Hz output or 60 Hz input/ 50 Hz output
Dual-input design, supporting independent bypass
Flexible battery configuration (settable 16 – 20 pcs batteries)
Digitally controlled charger
High charging current available (Max. 12 A)
Charging voltage and current are configured by demands
Linear derating in low voltage input-reducing battery discharging times, extending the service life of the battery
Intelligent battery management, automatic floating/ equalizing charge control, charger dormancy control, increasing battery life by 50%
Ability to switch on the UPS with batteries – cold start
Settable delayed start time when mains power is restored, reducing the impact on the power grid or generator
Fan speed varies intelligently with temperature, reducing noise and extending its service life
Equipped with a self-aging function
Compact internal layout miniaturized the complete unit for a small footprint
LCD+LED display, multi-functional keys operation, friendly human-machine interface
Powerful background software for parameters configuration
Advanced multi-platform communications: RS232, USB, RS485, SNMP, and dry contacts communication interfaces
Effective software and hardware protection function, robust self-diagnostic function, and abundant event log for check

UP906-G4
UP910-G4

TECHNICAL SPECIFICATIONS UP906-G4 \| 6kVA
	MODEL	UP906-G4
	Capacity	6 kVA / 6 kW
INPUT
	Input wiring	Single-phase three-wire (1 Φ + N + PE)
	Rated Voltage	208 / 220 / 230 / 240 Vac
	Voltage range	110 ~ 176 Vac (linear derating between 50% and 100% load); 176 ~ 288 Vac (no derating)
	Rated frequency	50 / 60 Hz (auto-sensing)
	Frequency range	40 ~ 70 Hz
	Power factor	≥0.99
	Bypass voltage range	– 40% ~ +15% (settable)
	Total harmonic distortion (THDi)	≤ 5%
OUTPUT
	Output wiring	Single-phase three-wire (1 Φ + N + PE)
	Rated Voltage	208 (PF=0.9) / 220 / 230 / 240 Vac
	Voltage regulation	+ 1%
	Frequency	Synchronized to bypass in mains mode; 50 / 60 Hz±0.1 % Hz in battery mode
	Waveform	Sinusoidal
	Power factor	1
	Total harmonic distortion	≤ 1 % (linear load); ≤ 4% (non-linear load)
	Crest factor	3:1
	Overload	105% ~ 110%for 10 min, 110% ~ 125% for 1 min, 126% ~ 150% for 30 s
BATTERIES
	DC voltage	192 Vdc (192 -240 Vdc settable)
	Number of batteries	16 pcs (16 -20 settable)
	Inbuilt battery (standard model)	12V/7Ah x16
	Charging Current	Standard model: 1 A; Long time model: 5A (default),1 -5A settable, 12A (optional)
	Recharge time	Standard model: 90% capacity restored in 8 hours Long time model: depend on the capacity of battery
SYSTEM
	Efficiency	≥94% at 100% load, max. 95% at 60% load, ≥98% in ECO mode
	Transfer time	0 ms
	Protections	Short-circuit, overload, overtemperature, battery low voltage, overvoltage, undervoltage and fan failure
	Max. number of parallel connections	4
	Communications	RS232 (standard), USB / RS485 / dry contacts/ SNM P / battery temperature compensation (optional)
	Display	LCD+ LED
OTHER
	Operating temperature	0 – 40°C
	Storage temperature	25° ~ 55°C (without battery)
	Relative Humidity	0 ~ 95% (non-condensing)
	Altitude	≤ 1000 m, derating 1 % for each additional 100 m
	IP rating	IP 20
	Noise level at 1m	≤ 55 dB
	Dimensions WxDxH (mm)	191 x 465 x 711 (S) , 191 x 465 x 350 (H)
	Net Weight (Kgs)	53 (S) , 14.5 (H)
	Gross Weight (Kgs)	61 (S), 16 (H)
S means standard model; H means long time model. All specifications are subject to change without notice.

TECHNICAL SPECIFICATIONS UP910-G4 \| 10kVA
	MODEL	UP910-G4
	Capacity	10 kVA / 10 kW
INPUT
	Input wiring	Single-phase three-wire (1 Φ + N + PE)
	Rated Voltage	208 / 220 / 230 / 240 Vac
	Voltage range	110 ~ 176 Vac (linear derating between 50% and 100% load); 176 ~ 288 Vac (no derating)
	Rated frequency	50 / 60 Hz (auto-sensing)
	Frequency range	40 ~ 70 Hz
	Power factor	≥0.99
	Bypass voltage range	– 40% ~ +15% (settable)
	Total harmonic distortion (THDi)	≤ 5%
OUTPUT
	Output wiring	Single-phase three-wire (1 Φ + N + PE)
	Rated Voltage	208 (PF=0.9) / 220 / 230 / 240 Vac
	Voltage regulation	+ 1%
	Frequency	Synchronized to bypass in mains mode; 50 / 60 Hz±0.1 % Hz in battery mode
	Waveform	Sinusoidal
	Power factor	1
	Total harmonic distortion	≤ 1 % (linear load); ≤ 4% (non-linear load)
	Crest factor	3:1
	Overload	105% ~ 110%for 10 min, 110% ~ 125% for 1 min, 126% ~ 150% for 30 s
BATTERIES
	DC voltage	192 Vdc (192 -240 Vdc settable)
	Number of batteries	16 pcs (16 -20 settable)
	Inbuilt battery (standard model)	12V/9Ahx16
	Charging Current	Standard model: 1 A; Long time model: 5A (default),1 -5A settable, 12A (optional)
	Recharge time	Standard model: 90% capacity restored in 8 hours Long time model: depend on the capacity of battery
SYSTEM
	Efficiency	≥94% at 100% load, max. 95% at 60% load, ≥98% in ECO mode
	Transfer time	0 ms
	Protections	Short-circuit, overload, overtemperature, battery low voltage, overvoltage, undervoltage and fan failure
	Max. number of parallel connections	4
	Communications	RS232 (standard), USB / RS485 / dry contacts/ SNM P / battery temperature compensation (optional)
	Display	LCD+ LED
OTHER
	Operating temperature	0 – 40°C
	Storage temperature	25° ~ 55°C (without battery)
	Relative Humidity	0 ~ 95% (non-condensing)
	Altitude	≤ 1000 m, derating 1 % for each additional 100 m
	IP rating	IP 20
	Noise level at 1m	≤ 58 dB
	Dimensions WxDxH (mm)	191 x 495 x 711 (S), 191 x 495 x 350 (H)
	Net Weight (Kgs)	62 (S), 16.5 (H)
	Gross Weight (Kgs)	70 (S). 18 (H)
S means standard model; H means long time model. All specifications are subject to change without notice.